■ 特點 FeAtUres
◎ 熱效率高。因滾筒干燥機傳熱機理屬熱傳導,傳熱方向在整個操作周 期中保持*,除蓋散熱和熱輻射損失外,其余熱量全都用于筒壁濕料膜 的蒸發上,熱效率可達70%-80%.
◎ 操作彈性大,適用性廣??烧{(diào)整滾筒干燥機的諸多干燥因素。如進料的 濃度、涂料料膜的厚度、加熱介質的溫度、滾筒的轉動速度等,都可以改 變滾筒干燥機的干燥效率,且諸多因素互無牽連。這給滾筒干燥操作帶來 很大方便,使之能適應多種物料的干燥和不同產量的要求。
◎ 干燥時間短。物料的干燥周期一般只有10-300秒,適合于熱敏性物 料。若將滾筒干燥機設置在真空器中,則可在減壓條件下運行。
◎ 干燥速率大。由于涂抹于筒壁的料膜很薄,一般在0.3-1.5mm,且傳 2 . 熱、傳質方向*,料膜表面可保持20-70kg .H 2O/m h的蒸發強度。
◎ High heat efficiency. The principle of heat transfer of the roller drier is heat conduction and the conducting direction keeps uniform in the whole operation circle. Except heat loss of end cover and radiation loss, all heat can be used for evaporating the damp materials on the wall of the roller . The efficiency can reach 70-80%.
◎ large operation elasticity and wide application. various drying factors of the drier can be adjusted, such as concentration of feeding liquid,thickness of material film, temperature of heating medium,rotating speed of the roller etc.which can change drying speed of the drier.As these factors have no interrelations each other,it brings great convenience to drying operation.and makes it applicable to dry various materials and to meet different requirements of production.
◎ Short drying period.the drying period of materials is normally 10 to 300 seconds,so it is suitable for heat-sensitive materials.It also can be reducing pressure operated if it is put in vacuum vessel.
◎ Fast drying rate.As film of materials coated on the wall of the roller is very thin. Normal,thickness is 0.3 to 1.5 mm,plus directions of heat and matter transmitting are 2 . identical, the vaporing strength on the surface of the film can be 20-70 kg.H 2O/m h.
■ 應用 ApplicAtion
◎ 適用于化工、染料、制藥、食品、冶金等行業液體或較粘稠物 料的干燥。
◎ It is suitable for drying liquid raw materials or thick liquid in the field of chemical, dyestuff, pharmaceutical, foodstuff, metallurgy industry and so on.
■ 技術參數 technicAl pArAMeters
參數 | Ø800×1600 | Ø1000×2000 | Ø1200×1200 | Ø1400×2400 | Ø1600×2400 |
工作壓力Mpa | ≤0.6 | ≤0.6 | ≤0.6 | ≤0.6 | ≤0.6 |
主電機功率KW | 3 | 4 | 4 | 5.5 | 7.5 |
傳熱面積(平方米) | 4 | 6.2 | 7.5 | 10.5 | 12 |
滾動轉速R/MIN | 0.5-5 | 0.5-5 | 0.5-5 | 0.5-5 | 0.5-5 |
加熱介質 | 蒸汽、導熱油 | 蒸汽、導熱油 | 蒸汽、導熱油 | 蒸汽、導熱油 | 蒸汽、導熱油 |
加料方式 | 頂部或底部 | 頂部或底部 | 頂部或底部 | 頂部或底部 | 頂部或底部 |
注:如客戶需要,可為客戶設計制造上部進料雙滾筒干燥機。
Note:We can design double-cylinder with upper feeding in according with the request of customers.