香蕉视频啪啪,99国产在线国语精品2024

PGZ系列刮刀下卸料全自動離心機		PGZ series Automatic scraper bottom discharge centrifuge
PGZ系列刮刀下卸料全自動離心機是一種自動化程度高、可實現全自動程序控制的間歇式分離機械，具有多種配置可供選擇。該系列產品具有無菌衛生、密閉防爆、多重安全保護等特點。適用于細顆粒和中等顆粒度固相懸浮液的固液分離，也可用于纖維狀物料的固液分離，如：石膏、硫酸、硫酸銅、氯化鈉、硼砂染料樹脂、農藥農劑等化工行業；食鹽、味精食品添加劑淀粉、制糖、調味品等食品行業；抗生素、維生素等制藥行業及礦物、環保等其它行業。		PGZ series automatic scraper bottom discharge centrifuge,operates intermittently and fully automatic programmed.It has properties of sterile,sealed and explosion-proof,ａnd safety protection.It is suit for separation of solid suspension includes tiny and medium particles,also suit for separation of fibrous material.Application field:chemical industry,food industry,pharmaceutical industry,mining industry ａnd environmental protection industry,etc.

◎工作原理

◎Working principle

待分離物料由進料管進入高速旋轉的離心機轉鼓，在離心力場的作用下，均布在轉鼓內壁的濾布上，進行過濾分離。分離過程中液相透過固相物料、濾布的縫隙和轉鼓壁上的小孔，從底盤的出液管流出；而固相物料則被截留在轉鼓壁內。達到分離要求后，通過刮刀自動下部卸料，出渣口排出。

Material comes into rotating drum trough feed tube,centrifugal force field makes it spread evenly on filter cloth of interior wall.During separation process,liquid trough gap within solid phase and filter cloth also holes of drum wall,discharges by outlet.While solid material retained within drum wall.After separation,scraper cut filter cake into pieces,discharges by outlet.The last step is self-cleaning,remove solid residues.

◎主要特點

◎Main features

1、全封閉結構，密封可靠，內腔氮氣保護，充分滿足密閉防爆要求。

2、快開式大翻蓋結構，可選裝電動斜式布料器，布料更均勻，有效降低布料不均勻帶來的振動。

3、附加在線清洗系統，保證清潔度，更能滿足GMP規范要求。

4、采用內抽式結構軸承座，便于安裝與維修。

5、采用HMI觸摸人機界面，PLC控制器；變頻程序控制系統，啟動平穩；通過程序設定，實現加料、過濾、洗滌、卸料等全過程的自動化；電機采用能耗或回饋制動。

6、可選配氣體反吹裝置，清除殘余濾餅。

7、無人看護，實現自動監測與保護。具有轉速檢測、料層探測、過振動保護、電機過載過熱保護、刮刀旋轉升降機械電氣雙重聯鎖保護、開蓋與機器運轉的聯鎖保護等多項功能。

1）Fully sealed structure,interior cavity protected from overload nitrogen,explosion proof.

2）Fast-opening big lid structure,available electric slope dish distributor evenly distribution,greatly impair vibration caused by unevenly feeding.

3）Internal online washing system,meet the requirement of high grade cleanliness.

4）Adopts interior removal bearing pedestal,facilitate assembly and repair.

5）Adopts HMI and PLC,working accompanies with converter,smooth start；through programmed design,realize fully automation of feeding,filtering,washing and discharging.Motor adopts dynamic braking and feedback braking.

6）Available air recoil unit,facilitate removal of filter cake.

7）Unattended operation facilitate automatic monitoring and protecting,has functions of speed detection,material layer detection,over vibration,overload,overheat,scraper turning and lifting has dual protection of machinery ａnd electric,lid opening interlock,etc.

◎結構示意圖(Structure schematic diagram)

◎主要材料		◎Composition of critical parts
1、平板為Q235A包襯不銹鋼。 2、轉鼓部件除轉鼓底為鑄鐵件(HT200)包襯不銹鋼外，其余全部采用不銹鋼。 3、機殼、機蓋包括附屬品全部采用不銹鋼。 4、平衡缸采用全不銹鋼。 5、軸承座采用鑄鋼件(ZG230-450)。		1) Flat plate is made of Q235A carbon steel coated by stainless steel. 2) Drum base is made of cast iron（HT200）coated stainless steel,other parts of drum is fully stainless steel. 3) Shell and top lid and belongings are made of stainless steel. 4) Balance cylinder is made of stainless steel. 5) Bearing pedestal is made of cast iron（ZG230-450）.

◎結構與配置(Structure and configuration)

項目(Item)	標準(Ordinary )	可選(Alternatives)
整機結構 (Whole machine set)	平板式結構 Flat plate
轉鼓與物料接觸部分的材質 (Drum contact with material part's composition)	SUS304不銹鋼 SUS304 stainless steel	SUS316、316L、321不銹鋼、鈦材、襯塑、襯HALAR、襯膠等 Stainless steel:SUS316,SUS316L,SUS321;titanium;lining plastic;lining HALAR;lining rubber;etc.
上蓋結構 (Top lid)	大翻蓋 Entire reversible	平蓋 Flat lid
上蓋附件 (Top lid belongings)	進料管、水洗管、視鏡、防爆燈、刮刀裝置、料位探測器 Feed tube,washing tube,observation hole,explosion-proof lamp,scraper unit,material position detecto	排氣孔、充氮口、撇液裝置及其他結構要求 Air outlet,nitrogen discharge hole,liquid skimming unit or others
開蓋方式 (Lid opening)	快開結構，平衡缸助力開蓋 Fast opening structure,Balance cylinder facilitate opening	人工開蓋 manual
布料方式 (Distribution method)	斜盤布料 Slope dish	側向布料 Side distribution
電機種類 (Motor type)	普通電機 Ordinary	變頻電機、防爆電機、節能電機 Frequency-alterable,explosion-proof or energy saving
制動方式 (Braking method)	能耗制動 Dynamic braking	回饋制動 Feedback braking
操控系統 (Controlling system)	變頻+PLC+HMI人機界面 frequency-alterable+PLC+HMI
安全防護(Safety technologies)	振動保護、開蓋聯鎖保護、電機防護罩、過載過熱保護、刮刀原位保護 Over vibration,opening interlock,motor shield,overload,overheat,scraper in sit	轉速顯示、防爆裝置、在線含氧檢測充氮保護系統 Speed display,explosion-proof unit,oxygen detection and nitrogen protection online system
卸料方式 (Discharge method)	液壓刮刀 Hydraulic scraper	氣動刮刀 Pneumatic scraper
清潔處理 (Cleaning)	水洗清潔 Washing	在線清洗結構、高壓氣體反吹系統、轉鼓水洗清潔 Online washing,high pressure air back flushing system,drum washing
三角皮帶 (Triangular belt)	普通三角皮帶 Ordinary	防靜電三角皮帶 Static proof
其他 (Others)		其他配置要求

◎技術參數(Technical parameters)

機型 Model	轉鼓直徑 Drum D	轉鼓高度 Drum H	轉鼓轉速 Drum speed	分離因數 Separation factor	容積 MaximumVolumn	裝料量 Maxiumum load	電機功率 Motor power	重量 weight	外形尺寸 dimensions
機型 Model	mm	mm	r/min		L	Kg	KW	Kg	mm
PGZ1000	1000	420	0-1000	0-560	140	200	11	3000	2000×1500×2000
PGZ1250	1250	630	0-1000	0-700	400	520	18.5	5000	2200×1800×2550
PGZ1500	1500	700	0-850	0-605	570	800	22	8500	2600×2200×2650
PGZ1600	1600	800	0-800	0-575	850	1100	37	11000	2850×2300×2650

此為常用參數，具體產品所用參數根據用戶需要定制。

Above are ordinary parameters,could tailored according to customer’s requirements.

PGZ系列刮刀下卸料全自動離心機（PGZ series automatic scraper bottom discharge centrifuge）返回列表頁

PGZ系列

刮刀下卸料全自動離心機

PGZ系列

刮刀下卸料全自動離心機