亚洲日韩在线观看不卡,叼黑视频

PBL系列密閉上卸料直聯離心機		PBL series direct-connected driving upper discharge centrifuge
PBL系列離心機是一種適用于高潔凈生產、衛生級過濾離心機，廣泛用于制藥、食品、精細化工等行業的多種固液混合物分離。它具有制造工藝高，耐腐蝕性強，工作穩定、符合高衛生要求等顯著特點。		PBL series centrifuge meet the requirement of high cleanliness and sanitary filtering,also performs well in corrosion resistance.Application field;chemical industry,food industry,pharmaceutical industry,etc.

◎工作原理

◎Working principle

待分離物料由進料管進入高速旋轉的離心機轉鼓，在離心力場的作用下，均布在轉鼓內壁的濾布上，進行過濾分離。分離過程中液相透過固相物料、濾布的縫隙和轉鼓壁上的小孔，從底盤的出液管流出；而固相物料則被截留在轉鼓壁內。達到分離要求后停機，開啟機蓋，人工用卸料，完成一個工作循環。

Floating liquid come into drum trough feed tube,centrifugal force field makes solid phase spread evenly on filter cloth forms a cake.While liquid phase through gap between solid phase and filter cloth also holes of drum,discharge from liquid outlet of base.When it reaches expected effect,turns down the machine,opens lid,discharge material by human,then a whole working cycle has been finished.

◎主要特點

◎Main features

1、全密閉結構避免分離物料的交叉感染，內腔氮?dú)獗Ｗo(hù)，滿足密閉防爆要求。
2、電機直接傳動，無皮帶摩擦帶來的粉塵污染。
3、大翻蓋，快開結構。
4、與物料接觸部分為不銹鋼，耐腐蝕性好。
5、設備主要零部件表面均采用精密拋光處理，內部結構，易清洗。
6、維護方便快捷，無易損件。

1）Fully sealed structure prevent material from cross infection,interior cavity nitrogen overload protection,meet the requirements of explosion proof.

2）Unique motor shaft direct-connected driving with drum,free from dust pollution caused by belt friction.

3）Available reversible big lid and fast opening structure.

4）Parts contact material is made of stainless steel,has a property of corrosion proof.

5）Critical parts surface is polished,interior structure without dead corner,easy to cleaning.

6）Facilitate repair and maintenance,without vulnerable part.

◎結構示意圖(Structure schematic diagram)

◎主要材料		◎Composition of critical parts
1、平板為Q235A包襯不銹鋼。 2、轉鼓部件除轉鼓底為鑄鐵包襯不銹鋼外其余全部采用不銹鋼。 3、軸承座采用鑄鋼件包襯不銹鋼。 4、機殼、機蓋包括附屬品全部采用不銹鋼。 5、直聯電機外部與物料接觸部分包襯不銹鋼。 6、平衡缸采用不銹鋼制作。		1）Flat plate is made of Q235A carbon steel coated by stainless steel. 2）Drum base is made of cast iron coated stainless steel,other parts of drum is fully stainless steel. 3）Bearing pedestal is made of cast iron coated stainless steel. 4）Shell,top lid and belongings are made of stainless steel. 5）Direct-connected motor parts contact material are coated stainless steel. 6）Balance cylinder is made of stainless steel.

◎結構與配置(Structure and configuration)

項目(Item)	標準(Ordinary )	可選(Alternatives)
整機結構 (Whole machine set)	平板式結構 Flat plate
轉鼓與物料接觸部分的材質 (Drum contact with material part’s composition)	SUS304不銹鋼 SUS304 stainless steel	SUS316、316L、321不銹鋼、鈦材、襯塑、襯HALAR、襯膠等 Stainless steel:SUS316,SUS316L,SUS321;titanium;lining plastic;lining HALAR;lining rubber;etc.
機蓋結構 (Cover structure)	翻蓋 Reversible
機蓋附件 (Cover articles)	進料管、水洗管、視鏡、防爆燈 Feed tube,washing tube,observation hole,explosion-proof lamp	排氣孔、充氮口及其他結構要求 Air outlet,nitrogen discharge hole unit or others
開蓋方式 (Lid opening)	快開結構，平衡缸助力開蓋 Fast opening structure,Balance cylinder facilitate opening	氣動開蓋 Pneumatic turning shell
布料方式 (Distribution method)	側向布料 Side distribution
電機種類 (Motor type)	普通電機 Ordinary	變頻電機、防爆電機、節能電機 frequency-alterable,explosion-proof or energy saving
制動方式 (Braking method)	能耗制動 Dynamic braking	回饋制動 Feedback braking
操控系統 (Controlling system)	變頻、手動 frequency-alterable,manual	PLC+HMI人機界面 PLC+HMI
安全防護(Safety technologies)	振動保護、開蓋聯鎖保護、電機防護罩、過載過熱保護 Over vibration,opening interlock,motor shield,overload,overheat	轉速顯示、在線含氧檢測充氮保護系統 Speed display,oxygen detection and nitrogen protection online system
卸料方式 (Discharge method)	人工 manual
清潔處理 (Cleaning)	水洗清潔 Washing	在線清洗結構 Online washing
其他 (Others)		其他配置要求

◎技術參數(Technical parameters)

機型 Model	轉鼓直徑 Drum D	轉鼓高度 Drum H	轉鼓轉速 Drum speed	分離因數 Separation factor	容積 MaximumVolumn	裝料量 Maxiumum load	電機功率 Motor power	重量 weight	外形尺寸 dimensions
機型 Model	mm	mm	r/min		L	Kg	KW	Kg	mm
PBL600	600	320	0-1500	0-756	45	70	4	800	1200×1000×1350
PBL800	800	400	0-1500	0-1000	100	135	7.5	1100	1400×1200×1350
PBL1000	1000	420	0-970	0-526	140	200	11	1900	1700×1500×1400
PBL1200	1200	500	0-900	0-545	250	350	15	2900	2000×1800×1500
PBL1250	1250	500	0-900	0-567	300	420	15	3000	2000×1800×1700

此為常用參數，具體產品所用參數根據用戶需要定制。

Above are ordinary parameters,could tailored according to customer’s requirements.

PBL系列密閉型上卸料直聯離心機(PBL Series direct-connected driving upper discharge centrifuge) 返回列表頁

PBL系列

密閉上卸料直聯離心機

PBL系列

密閉上卸料直聯離心機