產品介紹:
The thermo-sensitive element of bimetallic trap is a bimetallic element cast through a special process by two metals of different expansion ratio.When the bimetallic element expands after heated,different expansion ratio results in bending.The thermo-sensitive element produced on the basis of this quality can act as a switch.Bimetallic Traps are divided into adjustable offline (BK,CS17H and CS47) and online (adjustable bimetallic element TB).
優點:
1、結構簡單,容易安裝和維修,抗水擊,排空性能。
2、利用高溫凝結水形成水封,沒有新鮮蒸汽泄露(零泄露)。
3、動作靈敏,無噪聲。
4、抗水擊,對壓力突然變化沒有影響。
5、可用于過熱蒸汽系統。
6、可以使用高壓高溫的蒸汽管線。
7、具有良好的排空氣性能,不怕凍。
Merits
1.Simple structure,easy to install and maintain,resistant to water hammer and superb emptying performance.
2.Water seal by high-temperature condensate,no leakage of fresh steam (zero leakage).
3.Flexible and noiseless.
4.Water hammer resistance with no effect from abrupt pressure changes.
5.Adoptable for overheat steam system.
6.Adoptable for high-pressure and high-temperature steam pipes.
7.Good air discharge quality with resistance to coldness.
雙金屬片式疏水閥/BIMETALLIC TRAP
技術參數/Technique parameter
殼體壓力等級 Shell pressure grade | 負荷泄漏率 Load leakage | 使用介質 Used medium | 允許背壓率 Permitted backpressure rate | 節能效果 Energy saving effect | 適用過熱蒸汽 Use superheated steam |
1.6、2.5、4.0、6.4、10MPA | 0% | 蒸汽、凝結水 Steam、Condensate water | ≥75% | 優秀 Excellence | 適應 Adaption |
工作壓差 Maximum operating pressure differential | 抗凍性 Freezing resistance | 排水方式 Drainage method | 允許溫度 Maximum allowable temperature | 排空氣裝置 Air exhaust system | 抗水擊 Resis |
10.0MPA | 優秀 Excellence | 連續方式 Continue mode | 420~550℃ | 自動 Automatic | 適應 Adaption |
外形尺寸和重量/Prime out-form dimensions and weigh
產品型號 Product model | 口徑(DN) Calibre | L法蘭 Flange | L螺紋/焊接 Thread/welding | H1 | H2 | W | 重量(kg) weight | 使用壓力范圍(MPa) Pressure change range | 公稱壓力(MPa) Nominal pressure |
BK271 BK274 BK276 | 15~20 25 | 210 230 | 130 | 105 | 25 | 105 | 5.5/8.3 | 0.1-6.4 | 6.4 |
主要零件材料/The materials of primary accessories
零部件名稱 Part and component name | 材質Material |
閥體、閥蓋 Valve body、Valve cover | 碳鋼、合金鋼 Carbon steel、Alloy steel |
雙金屬片 Bimetal | 不銹鋼金屬 Stainless steel |
閥座 Valve seat | 不銹鋼 Stainless steel |
閥桿 Valve rod | 不銹鋼 Stainless steel |
過濾網 Filtrating screen | 不銹鋼 Stainless steel |
1、選型時請?zhí)峁┕ぷ鲏毫?、工作壓差、凝結水發生量、工作溫度、連接方式及標準。
2、凝結水負荷的安全系數一般為2~3倍。
3、正確安裝、定期保養清除閥內污物,保證疏水閥正常工作和延長使用壽命。
Note
1.Please provide operating pressure and operating pressure difference,generating quantity of condensate water,operating temperature,connecting mode and standards in selecting product models.
2.The load of condensate Water's safety coefficient reaches 2 to 3 times in general.
3.Please make sure the drain valve is installed properly,maintained regularly,cleaned up and operates under the normal condition,so as to extend its service life.