The HSMT-Flex™ is intended for one axis encoded inspection of circumference welds on pipes of 4.5 in. OD (114.3 mm) and greater. The scanner comes equipped with four probe holders but can be mounted with a total of eight probes with optional probe holders. Mounted probes can be either phased array or conventional UT for most efficient inspections.
The major characteristic of the scanner is its capacity to bend in the center. This allows the scanner to fit on smaller pipes and also to bring the force of the spring-loaded arm in the radial direction of the pipes for better stability of the wedge, and therefore, optimum data acquisition. For the same reason, optional probe holders that are installed on the outside of the scanner can also pivot.
The HSMT-Flex also allows one of its side frames to slide. This feature allows having the probes mounted on the outside of the scanner. This provides a configuration that is well-suited for hard-to-reach places such as pipe-to-component welds.
Standard Inclusions
Scanner frame with handles, and:
Two 340 mm (13.5 in.) frame bars
Two 500 mm (20 in.) frame bars
OmniScan-compatible waterproof spring-loaded wheel encoder with 5 m cable
Four 90o probe holder brackets
4 spring-loaded arms (SLA)
4 TOFD-P/E 31.75 mm yokes
2 PA 40 mm × 55 mm yokes
Irrigation tubing and accessories
Note: Umbilical cable, probes, and wedges are not included with the scanner.
Feature
Folding frame to optimize probe contact on pipes
4 plastic-covered magnetic wheels hold the unit against a ferromagnetic inspection surface.
Compact and versatile. The provided frame bars allow size customization.
Can support up to 4 conventional UT or phased array probes on pipes
Can support up to 8 conventional UT or phased array probes on pipes bigger than 12 in. OD using optional standard probe holder kit or
on pipes from 4.5 in. to 12 in. OD using optional pivoting probe holder kit
Light aluminum frame
Independently positioned and spring-loaded probe holders
Waterproof spring-loaded encoder with 12 steps/mm resolution
Removable handles for lower profile
Eyelet for umbilical attachment
Integrated water manifold simplifies couplant distribution
Metric/US Customary unit rulers on the scanner frame for easy probe separation measurement
采購中心
