制藥網>產品庫>儀器儀表>流量儀表>液位計>>磁耦合腔體

磁耦合腔體

參考價	面議

參考價

面議

具體成交價以合同協議為準

公司名稱深圳市利美泰克自控設備有限公司
品牌
型號
所在地
廠商性質其他
更新時間2021/11/15 12:01:14
訪問次數396

產品標簽:

在線詢價收藏產品查看電話同類產品

聯系我們時請說明是制藥網 上看到的信息，謝謝!

索取相關資料

公司介紹主營產品

LMTECH (利美泰克)是專業從事液位計和核工業輻射檢測儀表的研發、生產及銷售的國際品牌。LMTECH是世界磁性液位技術的，主要的液位計產品包括磁耦合液位指示器，磁致伸縮液位計，電接點液位計，磁耦合液位開關等。LMTECH生產的磁致伸縮液位計具有高智能化，高精度，高穩定性的鮮明特點，磁耦合液位指示器不但具有非常廣闊的溫壓適應范圍，更為重要的是該產品可以在非?？量痰膽?yīng)用工況中(如高粘度應用，高粉塵環境等)長期清晰而準確的直觀指示液位。當前LMTECH各類液位產品已經在歐洲，美洲，澳洲以及亞洲各行業得到了廣泛應用，其高質量的產品品質，經濟實惠的價格，優質及時的售后服務是LMTECH在眾多優秀品牌中脫穎而出的保障。LMTECH主要的輻射檢測儀表包括智能化多功能放射性輻射檢測系統，便攜式輻射檢測儀，放射性固體廢物污染等級快速檢測系統。其中放射性固體廢物污染等級快速檢測系統，有效國內快速檢測放射性固體廢物污染等級的技術空白，為核電廠等產生放射性固體廢物的單位提供了切實可行且經濟適用的按污染等級分裝固體廢物的解決方案。

展開顯示更多內容

磁耦合液位指示器，磁致伸縮液位計，電接點液位計，磁耦合液位開關等

產品簡介在線詢價

產品詳情腔體規格：測量范圍：300～15000mm指示精度：3mm工作壓力：0~34.5MPa工作溫度：-196～593℃介質密度：0.25g/cm3介質密度差：0.1g/cm3介質粘度：1500cp腔體規格：2~3腔體可選接液材質：不銹鋼

磁耦合腔體產品信息

產品詳情

腔體規格：
測量范圍：300～15000mm
指示精度：±3mm
工作壓力：0~34.5MPa
工作溫度：-196～593℃
介質密度：≥0.25g/cm3
介質密度差：≥0.1g / c m 3
介質粘度：≤1500cp
腔體規格：2'~3‘ 腔體可選
接液材質：不銹鋼，其他多類材質可供選擇，包括：PVC、PTFE、HC、HB、A20、Titanium、Ziconium 、Monel等可選。
過程連接：法蘭安裝，焊接短管連接，3/4 NPT螺紋(3000#)安裝可選

磁翻板腔體腔體
耐壓數據及計算方法

For the convenience of piping engineers, the following pages show the allowable pressure rating at temperature of various piping materials including Stainless Steel Type 304 and 316 in sizes ½” through 24” in popular wall schedules.
    Stress values shown at various temperatures are as given in Appendix A of ANSI B31.3-Code for Pressure Piping for Petroleum Refinery Piping.
The allowable pressure ratings have been calculated from the basic formula given in ANSI B31.3 as

follows:P= 2SET/D

Where:
T = design thickness of the pipe (121/2% less than the nominal wall thickness of any given pipe size)
P = internal design pressure, PSIG
D = outside diameter of pipe, inches
S = allowable stress for materials at service temperature, PSI
E = 1.0 for seamless pipe and   0.8 for welded pipe.

The computations shown are a preliminary guide for determining the proper wall thickness and are not to be considered a substitute for various Codes for Pressure Piping.

The user should refer to the applicable Code for Pressure Piping covering the design and material limitations and rules. The particular Code should be reviewed before final design thickness is determined. Depending upon the general service for which the piping system is intended, one of the following may be applicable:

• ASME-Section I-Power Boilers
• ASME-Section III-Nuclear Power Plant Components
• ASME-Section VIII-Pressure Vessels
• ANSI B31.1-Power Piping
• ANSI B31.3-Petroleum Refinery Piping
• ANSI B31.5-Refrigeration Piping

The user is cautioned that the stress values shown in the various Codes do vary. For example, the stress values used in our calculations are not the same as noted in ANSI B31.1. Limitations on maximum temperature for materials may also vary with each Code.

It should be noted that all calculations are based on a specific piping material. Other materials may be used in the manufacture of butt weld fittings.