德國MP-Sensor GmbH傳感器
產品列表:
干簧傳感器
干簧繼電器
干簧管
浮動開關
流體
測試工具
塑料成型
:王工
同號
449147851
價注意事項:
1.請發書面詢價函(郵件,,傳真等),不接受口頭報價。
2.如果型號不能*對上,請?zhí)峁┯⑽钠放泼?具體型號+數量。
3.詢價的商友請主動告知公司名稱和,謝謝。
產品列表:
Flanges and Fittings 法蘭與配件
Valves 閥門
Roughing Components
Vacuum Measurements 真空測量
Viewports & Glass Components
Electrical & Fluid Feedthroughs 運動與操縱
Motion & Manipulation
Chambers
Custom Engineering
Five industry standard vacuum connection systems cover most high and ultrahigh vacuum applications. Del-Seal?CF metal seal flanges, ISO KF Kwik-Flange? ISO LF Large-Flange? ANSI-ASA flanges, Quick- Disconnect and various tube-weld fittings and an extensive selection of hybrid flange adapters suitable for connections between dissimilar mount systems are offered. MDC抯 Del-Seal?CF flanges are 99.9% Conflat?compatible metal-seal flanges suitable for the most demanding UHV applications. Del-Seal?CF metal seal flanges are available in a wide range of sizes that can accommodate 1/8" to 14" tube diameters. For tube sizes above 14 inches and up to 24 inches in diameter, MDC wire seal flanges are recommended.
Introduction to Del Seal?Flanges
Introduction to Del Seal?CF Fittings
Introduction to Wire Seal Flanges
Introduction to Kwik-Flange?ISO KF
Introduction to Large Flange ISO LF
Introduction to ISO KF & LF Fittings
Introduction to ANSI ASA Flanges
Introduction to Weldable Components
Introduction to Hybrid Adapters
MDC offers the industry抯 largest selection of high and ultrahigh vacuum valves. Gate, angle, inline, butterfly, leak and all-metal angle and inline valves are included. Gate valves with circular and rectangular port geometries in sizes up to 20 inch port diameters and angle valves in sizes up to 10 inch port diameters are constructed using 304 stainless steel and fitted with patented actuation and position indication mechanism
Introduction to Gate Valves
Introduction to Rectangular Gate Valves (SEMI / MESC)
Introduction to Rectangular Gate Valves (C-Loc)
Introduction to Angle & Inline Valves
Introduction to All-Metal Valves
Introduction to Variable Leak Valves (Fine Leak)
Introduction to Variable Leak Valves (Variable Leak)
Introduction to Butterfly Valves
MDC offers a basic selection of the industry抯 most popular roughing components including foreline traps, vacuum sorption pumps, flexible roughing lines and various accessories to complement the entire product line.
Introduction to Foreline Traps
Introduction to Vacuum Pumps
Introduction to Vacuum Roughing Hose
MDC provides a basic but proven assortment of the most commonly used vacuum gauge tubes. Thermocouple and ionization gauge tubes designed to meet the rigorous demands of most vacuum applications are offered for replacement of Granville-Phillips, Perkin-Elmer and Varian style gauge tubes. In addition, a visual dial Bourdon gauge provides a quick method of estimating vacuum levels.
Introduction to Vacuum Measurement
Viewports and Glass Components
MDC offers a wide selection of optical quality windows. These hermetic viewports are available in various window materials including type 7056-glass, sapphire and fused quartz. They are constructed with vacuum grade materials using the latest in glass-to-metal and ceramic-to-metal bonding technology.
Introduction to Viewports
Introduction to Glass Components
Electrical and Fluid Feedthroughs
Electrical feedthroughs are manufactured by Insulator Seal, MDC抯 ceramic-to-metal seal division located in Sarasota, Florida. Insulator Seal bonds high purity alumina ceramics with low expansion metals to produce the industry抯 most reliable hermetic seals. The electrical feedthroughs produced with this bonding technology are required in most any vacuum system and provide the means of delivering or transmitting high current or voltage as well as instrumentation signals in and out of vacuum systems. Non-electrical fluid feedthroughs for conventional and liquid nitrogen cooling are also offered in this section of the catalog.
Introduction to Electrical Feedthroughs
Introduction to Fluid Feedthroughs
MDC has assembled a comprehensive selection of precision instruments ideally suited for the manipulation of samples located inside a vacuum chamber. Rotary, linear, wobble and combined motion instruments are available for precise manipulation of samples. Motion instruments are driven with fine-pitch micrometer lead screws and constructed with a welded bellows actuator for maximum reliability and UHV compatibility. Also available are multiple-axis xyz-motion stages, rotatableaxis and axial-lift stages, load-lock systems, magnetic transporters and patented sample handling systems. Automation via motorization is available for most of the motion instruments in this section.
Introduction to Motion & Manipulation
Introduction to Motion
Introduction to Manipulation
Introduction to Load-Lock Systems
Introduction to In-Vacuum Accessories
Introduction to Motorization
MDC offers standard vacuum chambers for basic research and laboratory vacuum applications. Stainless steel bell jars, feedthrough collars, baseplates and base wells with elastomer seal interfaces are ideally suited for most high vacuum applications. Standard surface science chambers fitted with Del-Seal?CF metal seal flanges are available for demanding UHV surface analysis applications.
Introduction to Bell Jar Systems
Introduction to Surface Science Analysis
Custom Engineering
This catalog represents MDC抯 ongoing efforts in the development and production of practical and dependable vacuum solutions for the scientific and industrial vacuum community. In the event the product you seek is not in this catalog, MDC can provide estimates for the modification or custom fabrication of most products depicted herein.
Chamber geometry
Vacuum components made to order
Modification to standard parts
Series | Axis | Range | Out | Datasheet | Picture |
---|---|---|---|---|---|
HNS-45-D | 1/2 axis | -45°...+45° |
|
| |
MNS-10-D MNS-45-D MNS-85-D | 2 axis | -10°...+10° -45°...+45° -85°...+85° |
|
| |
DNS-10-D DNS-45-D DNS-85-D | 2 axis | -10°...+10° -45°...+45° -85°...+85° |
|
| |
HNS-10-A HNS-45-A HNS-85-A | 1 axis | -10°...+10° -45°...+45° -80°...+80° |
|
| |
ENS-5-D ENS-7-D | 1 axis | -3°...+3° -5°...+5° |
|
|
Control Units and Displays
Range | Description | Out | Datasheet | Picture |
---|---|---|---|---|
MP-IV2 | Pulse Stretching2ms...2000ms |
|
| |
MP-Z2 | Control Unitl1 x Schließer /1 x Öffner |
|
| |
MP-T3 | Switching Device |
|
| |
MP-BG | Braking Device for AC-motors |
|
| |
TPA-51 | Digital Display |
|
| |
BPC | Programmable Position Controller with 32 Programs |
|
| |
BMC | Elektronic Cam Control |
|
|
Reed sensors | |
Reed relays | |
Reed switches | |
Float switches | |
Floats | |
Testing tools | |
Plastic molding |
Reed sensors |
Monitoring of translational and rotatory movements. Stateful monitoring, e.g. for alarm- and burglary installations. Optional with special approval after VdS, UL, etc. |
產品列表:
非接觸式測量長度
非接觸式轉速測量
非接觸式速度監測
非接觸材料測試
非接觸式質量檢測
二極管激光驅動器系統
激光二極管模塊
Product Overview
Length, Speed, Motion, ... by Laser Technology, Camera based and Optical Gauges
non-contact length measurement and non-contact speed measurement - non-slip and maintenance-free, high accurate according to European MID 2004/22/EC standard
ELOVIS is known for its outstanding non-contact length and non-contact speed gauges and stands for excellence in electronics, optics and laser technology, used in industrial and laser applications. ELOVIS products for industry serve a stable longterm determination of production, productivity and billing parameters, as well as quality and process parameters. Due to high performance, ELOVIS sensors are mostly used for measurement during running process of semi-finished products, especially in the field of winding technology. ELOVIS also offers measurement and calibration services.
Non-contact length measurementapplications:
|
Non-contact speed measurementapplications:
|
Non-contact speed monitoringapplications:
|
Non-contact material testingapplications:
|
Non-contact quality testingapplications:
|
Laser Driver Systemsfeatures:
|
|
Non-contact, optical, high accurate measurement of physical values and process parameters directly on materials and objects in motion via laser or camera. Measurement of: length, velocity, motion, standstill, slippage, width, heigth, elasticity and shrinkage.
Industrial Applications:
- Paper, Tissue, Packaging (coated, uncoated, printed, laminated, ...)
- Plastic and Extrusion (Film, Foil, Profile, Tube, Hose, Gasket Seal, ...)
- Textile and Nonwoven, Flooring (Carpet, PVC, Laminate, ...)
- Metall (Foil, Coil, Sheet, Rod, ...)
- Wire and Cable (bright, insulated, coated, stranded, ...)
- Wood and Construction Materials
Machines equipped with ELOVIS gauges:
- Roll Winder, Unwinder, Slitter Rewinder, Short Roll Winder, Re-reeler
- Cutting Maschines, Cross Cutter, Sorting Cross Cutter
- Inspection Machines
- Calander, Coating Machines, Finishing Machines