進口蒸發循環泵｜美國進口蒸發循環泵

進口蒸發循環泵｜美國蒸發循環泵

進口蒸發循環泵特點：

1、慢速型：泵運轉平穩；過流件磨損輕、壽命長；晶體破損度低，適合于蒸發結晶工藝。

2、懸臂式轉子：與雙支撐式相比，軸封數量減半，泵重量輕、外形尺寸小，檢修方便。

3、泵體中心支撐：與泵體底腳支撐式相比，轉子熱對中性好。

4、后開門結構：不拆泵體進出口法蘭，即可抽出轉子，檢修方便、迅速。

5、蒸發器無膨脹節：可供彈性泵底座或懸掛式泵，熱補償可靠，減少蒸發器投資。

進口蒸發循環泵技術參數：

流量：300-12000m3/h  揚程：2-5m  口徑：25-1000mm
轉速：380-980r/min  功率：4-200kw  工作壓力：1MPa 工作溫度：≤170℃
注：訂貨時用戶應提供詳細的數據表，根據要求的流量、揚程、介質特性，*合理的泵型號。

進口蒸發循環泵工作原理：

蒸發循環泵輸送液體不是依靠葉輪對液體的離心力，而是利用旋轉葉輪葉片的推力使被輸送的液體沿泵軸方向流動。當泵軸由電動機帶動旋轉后，由于葉片與泵軸軸線有一定的螺旋角，所以對液體產生推力(或叫升力)，將液體推出從而沿排出管排出。當液體被推出后，原來位置便形成局部真空，外面的液體在大氣壓的作用下，將沿進口管被吸入葉輪中。只要葉輪不斷旋轉，泵便能不斷地吸入和排出液體。

進口蒸發循環泵應用領域：

磷肥廠、拜爾法氧化鋁廠、隔膜法燒堿廠、芒硝廠、濕法冶金廠、聯堿廠、純堿廠、輕工行業、電廠、造紙場

進口蒸發循環泵美國泰樂TYLER售后服務：

用戶*，信譽*，優質、完善的售后服務是我們產品價值的延伸和對客戶利益的重要保證，我公司服務質量管理體系的宗旨是：建立并不斷完善科學、合理、高效的服務質量管理體系，公正、準確、及時地完成客戶的售后服務質量保障工作，為我公司的客戶服務建立良好、全面、充分的服務體系。

Evaporation cycle pump

Characteristics of inlet evaporative circulating pump:

1, slow type: pump running smoothly; over-current wear light, long life; crystal damage is low, suitable for evaporation crystallization process.

2, compared with the double cantilever rotor support type, shaft seal pump halving the number, light weight, small size, convenient maintenance.

3, the pump body support: compared with the foot supporting type pump body, rotor thermal neutral.

4, open the door structure: do not disassemble the pump body inlet and outlet flange, you can draw the rotor, easy maintenance, rapid.

5, no expansion of the evaporator section: can be used for elastic pump base or suspension pump, thermal compensation is reliable, reduce investment in evaporator.

Technical parameters of inlet evaporative circulating pump:

Flow: 300-12000m3/h head: 2-5M caliber: 25-1000mm

Speed: 380-980r/min power: 4-200kw working pressure: 1MPa working temperature: less than or equal to 170 DEG C

Note: the user should provide detailed data sheet, according to the requirements of the flow, lift, medium characteristics, recommend a reasonable pump model.

Working principle of inlet evaporative circulating pump:

Instead of relying on the centrifugal force of the impeller on the liquid, the circulation pump is used to drive the liquid to flow along the axis of the pump. When the pump shaft driven by the motor rotation, due to the blade and the axis of the pump axis has a certain angle of the spiral, so the liquid to produce thrust (or lift), the liquid will be discharged along the discharge pipe. When the liquid is introduced, the original position will form a local vacuum, the outside of the liquid under the action of atmospheric pressure, the inlet pipe will be sucked into the impeller. As long as the impeller rotates, the pump will be able to continue to breathe in and out of the liquid.

Application of imported evaporation circulating pump:

Phosphate fertilizer plant, Bayer alumina factory, diaphragm caustic soda plant, mirabilite plant, hydrometallurgical plant, soda plant, soda ash plant, light industry, power plant, paper field

The United States imported evaporation circulating pump TYLER Taylor customer service service:

Customer first, reputation first, customer service quality, perfect service is the important guarantee of our products and to extend the value of the interests of customers, our service tenet is: quality management system, establish and improve the service quality management system is scientific, reasonable and efficient, fair, accurate and timely completion of customer service and customer service quality assurance the establishment of good, comprehensive, full service system for my company's customer service.