CD系列箱型干燥機適用于所有各類的聚合物材料烘干,并能同時烘干不同的材料,非常適合用于少量,多樣性的原料或試模時使用.也可用于電子,電機,電鍍,烤漆,印刷相關產品之預熱或干燥處理.
CD series of cabinet dryers mostly used for simultaneous drying of different kinds of polymers in small quantities or for drying mate rials for trial molding,They can also be applied in electronic engineering,electroplating,pharmacy,paintbaking,printing industries,etc,for preheating or drying related products.
| 本機特點 Features | | | | | |
| | | | | | |
| 采用精密P.I.D電子溫度控制,達到均勻的烘干效果. | | | |
| 高溫密封門可保持一致的溫度并降低熱量損耗. | | | |
| 不銹鋼材質的烤盤及內襯,阿防止在烘干過程中污染原料. | | | |
| 入風口,排風口均可調試設計 ,可方便調節風量. | | | |
| 24小時定時裝置,操作方便. | | | | |
| 配備超溫保護器,可避免超溫干燥. | | | | |
| 配備馬達過載保護. | | | | | |
| 配備警報燈,可立即反應故障. | | | | |
| 干燥溫度超出設定偏差值時,自動切斷發熱絲電源,保護發熱絲. | | |
| | | | | | |
| Accurate P.I.D temperature control to achieve even drying effect. | | | |
| Air-proofed in sulated door can maintain temperature constantly in side to reduce energy consum ption. |
| Stainless steeltray and liner bring no contamination to materials. | | | |
| Unique design of adjustable air inlet and exhaust. | | | |
| 24hours timer,easy to operate. | | | | |
| Overhe at prote ctor can prevent excessive drying. | | | |
| Motor overload relay. | | | | | |
| Visible alarm to indicate troubles immdeiay. | | | |
| Power would be autom atically cut off when drying temerature exceeds set deviation value to protect thermal fuse |
| 工作原理 Working Principle | | | |
| | | | | |
| 箱型干燥機中，有可移動的盤子，將需要烘干的原料放在盤子內，運行時風車迫使空氣通過發熱絲，再通過風板均勻吹進原料，當原料均勻烘干后，潮濕的空氣由排風口從另一面排出。 |
| | | | | |
| For cabinet dryers,materials to be dride are placed on the stainless steel made moveable trays,During operation,process air will flow to heating wire and be heated up to required temperature,then plow through a manifold with evenly scattered holes ,Moisture air is sent out through air exhaust port,It is designed to achieve an even drying effect. |
| 機型規格 Specifications | | | | | | | |
| 型號Model | 電熱功率(KW)heater | 馬達功率(KW)Blower | **干燥溫度(℃)Highest Temp | 盤架數Tray Quantity | 裝料量(kg)Total Capavity | 外部尺寸H*W*D(mm)Quter Dimension | 內部尺寸H1*W1*D1(mm)inner Dimension | 重量(kg)Net Weight |
| CD-5 | 4 | 0.37 | 200 | 5 | 50 | 1200*800*610 | 660*600*550 | 147 |
| CD-9 | 4.5 | 0.37 | 200 | 9 | 90 | 1440*800*610 | 900*600*550 | 178 |
| CD-20 | 9 | 1.5 | 200 | 20 | 200 | 1700*1210*860 | 1000*990*800 | 415 |
| CD-20L | 18 | 1.5 | 200 | 20 | 450 | 1865*1800*1060 | 1200*1600*1000 | 550 |
| 注:1)以上裝料量是以堆積密度為0.65kg/L,直徑為3-5mm塑膠原料顆粒為標準. | Note:1)Above loading capacity is based on pellet material of 0.65kg/L in bulk density and 3-5mm in diameter. |
| 2)機器電壓規格為:3φ,380VAC ,50Hz | | | | 23)Power:3φ,380VAC ,50Hz | | | |
制藥網
制藥網