行業產品

  • 行業產品

北京疏水閥門廠


當前位置:北京疏水閥門廠>>疏水閥>>熱靜力浮球式疏水閥-FQ3

熱靜力浮球式疏水閥-FQ3

返回列表頁
參  考  價面議
具體成交價以合同協議為準

產品型號

品       牌

廠商性質生產商

所  在  地北京市

聯系方式:祖?zhèn)?/b>查看聯系方式

更新時間:2024-09-26 07:41:52瀏覽次數:72次

聯系我時,請告知來自 制藥網

經營模式:生產廠家

商鋪產品:77條

所在地區:北京北京市

聯系人:祖?zhèn)?(經理)

產品簡介

杠桿浮球式是利用浮力原理和杠桿原理,通過液位的變化使浮球上升或下降,浮球驅動著杠桿使得閥瓣離開或接觸閥座達到開啟排水和關閉阻汽的作用

詳細介紹

     

    杠桿浮球式是利用浮力原理和杠桿原理,通過液位的變化使浮球上升或下降,浮球驅動著杠桿使得閥瓣離開或接觸閥座達到開啟排水和關閉阻汽的作用。采用自動排空氣閥,能自動排除不凝結氣體,非常靈敏,工作質量高,使用壽命長。連續排水,有水即排,最小過冷度為 0℃。杠桿浮球式疏水閥采用兩種結構方式A:?jiǎn)伍y座-杠桿浮球 B:雙平衡閥座-杠桿浮球
      單閥座:需要克服介質壓力對閥座的作用,閥座的孔徑不能很大,適用于小型設備、伴熱管線,蒸汽主管等排水小的場合。閥座孔設計在凝結水水位以下,自然形成水封,水、汽自然分離,達到無蒸汽泄漏,即便沒有凝結水采用球型密封的杠桿使得閥瓣緊貼閥座,達到無新鮮蒸汽的泄露。不受凝結水量波動和溫度的影響。
      雙平衡閥座:該閥利用雙閥孔設計,介質的壓力對兩個閥座作用相等,方向相反,介質壓力對閥座作用相抵消,閥蕊在開閥時壓力相對減少,從而獲得超大排量。工作時浮球隨閥腔內液體位的變化而上下浮動,帶動杠桿打開或關閉閥座。由于閥座孔在凝結水水位以下,形成水封,水、汽自然分離,達到無蒸汽泄漏。不受壓力、溫度、冷凝水流量波動的影響。


Lever-ball float trap


Lever ball float type trap employs the buoyancy principle and the lever principles:to make the ball float ascend or descend by the change in the liquid level and then the ball float drives the lever to make the valve disc from or touch the valve seat to realize drainage and closed block vapor. The product adopts the automatic air  exhaust to automatically eliminate non-condensing air.It is very precise with high operating and long service life.It can discharge whenever there is any water,and its minimum subcooled temperature is 0℃.The lever-ball float trap adopts two kinds of structure modes:A:Single valve seat-lever ball float;B:double balanced valve seat-lever ball float.

Single valve seat:it needs to overcome the operation on the valve seat by the medium pressure;the hole caliber of the valve seat cannot be too large and is applicable to such low displacement condition as mini-equipment,steam tracing pipeline and steam main pipe.The hole of the valve seat is designed beneath the water level of the condensate water to form water sealing to keep water apart from vapor,so as to prevent the leakage of the vapor.Though there is no condensate water that uses ball-type sealed lever to make the valve clack tightly adhesion to the valve seat,it can prevent the fresh vapor from leakage.Further,the product is free of the affect of the fluctuation of the condensate water's quantity and temperature.

The double balanced valve seat:this valve is designed to have two valve openings.The pressure of the medium act against the two valve seats equally in reverse direction,so the pressure on the valve seat is offset,the valve core assumes relatively low pressure when the valve is open,in this way the overlarge displacement is obtained.During the operating process,the ball float floats with the change in liquid level of the valve cavity to make the lever open or close the valve seat.The hole of the valve seat is designed beneath the water level of the condensate water to form water sealing to keep water apart from vapor,so as to prevent the leakage of the vapor.Further,the product is free of the affect caused by the fluctuation of pressure,temperature and condensate's flow. 


優點:

1、采用新型閥機構(新 SCCV 關閉方式和Z型結構),具有優良的密封性和耐久性。 
2、雙平衡閥座設計,比一般的疏水閥體積小而排量大,在特大排量場合更能發揮性。
3、單閥座設計可以水平或垂直安裝,可以滿足高背壓,低排量蒸汽管線。
4、內裝空氣自動排放閥,可防止空氣氣堵和蒸汽汽鎖。
5、全部部件安裝在閥蓋上,閥無需從配管上卸下,就可維修保養,簡單方便。


Merits

1.To use new-style valve mechanism (new SCCV closing mode and Z-shaped structure) to boast excellent tightness and endurance.
2.To employ double balanced valve seat design,it has smaller volume and larger displacement and can exert its advantages when needing large displacement.
3.The single valve seat model can be installed horizontally and vertically,satisfying the requirements of steam pipeline with high backpressure and low displacement.
4.The built-in automatic air exhaust can prevent air blocking and steam locking;

5.As all components are installed on the valve cover,so they can be maintained and cleaned up simply and easily without being removed from pipe arrangement.

熱靜力浮球式疏水閥/THERMAL-STATIC-BALL FLOAT TRAP



技術參數/Technique parameter

殼體壓力等級

Shell

pressure

grade

負荷泄漏率

Load leakage

使用介質

Used

medium

允許背壓率

Permitted

 backpressure

 rate

節能效果

Energy

saving

effect

工作壓差

Maximum

Operating

 pressure

differential

1.6、

2.5、

4.0、

10MPA

≈0%

蒸汽、凝結水

Steam、

Condensate

water

≥90%

優秀/

良好

Excellence/

good

10MPA

最小過冷度

Minimum

subcooled

temperature

排水方式

Drainage

method

允許溫度

Maximum

allowable

temperature

排空氣裝置

Air

exhaust

system

壓力變化范圍

Pressure

change

range

0℃

連續方式

 Continue mode

420℃

自動

 Automatic

適應

Adaption




主要零件材料/The materials of primary accessories

零部件名稱

Part and component name

材質Material

閥體、閥蓋

Valve body、Valve cover

鑄鋼、不銹鋼

Cast steel、Stainless steel

浮球、杠桿

Float ball、Lever

304不銹鋼

304 Stainless steel

雙平衡閥座

Dual Balance valve seat

STL合金和不銹鋼組合

Combination of STL alloy and Stainless steel

自動排空氣裝置

Automatic air exhaust

不銹鋼、熱敏元件

Stainless steel、Thermo-sensitive element

過濾網

 Filtrating screen

不銹鋼

 Stainless steel


外形尺寸和重量/Prime out-form dimensions and weigh

產品型號

Product

model

口徑(DN)

Calibre

L法蘭

Flange

L螺紋/

焊接

Thread/

welding

H1

H2

W

重量(kg)

weight

使用壓力

范圍(MPa)

Pressure

 change

range

公稱壓力

(MPa)

Nominal

pressure

FQ31

15-25

-

220

92

99

165

 13.5

0.1-2.5

2.5

FQ34

15-50

300

 

92

99

165

17 

0.1-2.5

2.5

FQ31-40

15-50

-

270

118

118

170

 

0.1-3.2

4.0

FQ34-40

15-50

340

-

118

118

235

 

0.1-3.2

4.0




 

注解:

1、選型時請?zhí)峁┕ぷ鲏毫?、工作壓差、凝結水發生量、工作溫度、連接方式及標準。

2、雙平衡閥座凝結水負荷的安全系數一般為1.5~2倍,單閥座凝結水負荷的安全系數為3。

3、正確安裝、定期保養清除閥內污物,保證疏水閥正常工作和延長使用壽命。

Note

1.Please provide operating pressure and operating pressure difference,generating quantity of condensate water,operating temperature,connecting mode and standards in selecting product models.

2.The safely coefficient for condensate water load of dual balance valve seat is generally 1.5 to 2 times,and the safely coefficient for condensate water load of single valve seat is 3 times.

3.Please make sure the drain valve is installed properly,maintained regularly,cleaned up and operates under the normal condition,so as to extend its service life.



關鍵詞:疏水閥 平衡閥
其他推薦產品更多>>

制藥網 設計制作,未經允許翻錄必究 .? ? ? Copyright(C)?2021 http://hg2288855.com,All rights reserved.

以上信息由企業自行提供,信息內容的真實性、準確性和合法性由相關企業負責,制藥網對此不承擔任何保證責任。 溫馨提示:為規避購買風險,建議您在購買產品前務必確認供應商資質及產品質量。

會員登錄

×

請輸入賬號

請輸入密碼

=

請輸驗證碼

收藏該商鋪

請 登錄 后再收藏

提示

您的留言已提交成功!我們將在第一時間回復您~