鹿迦機械全自動膠囊灌裝機NJP-2000

鹿迦機械全自動膠囊灌裝機NJP-2000采用PLC編程，無極變頻調速，人機界面操作，觸摸屏顯示。對運行故障或缺料能自動報警顯示，自動停機，故障排除后能自動消除報警。機器還具有三級密碼操控系統，參數設置，打印數據，清零等功能，防止非專業人員隨意胡亂操作影響機器運行。 機器所有傳動軸，凸輪，軸承等主要關鍵零件均采用進口材料，設備質量可靠，是充填膠囊藥品的理想設備，并*符合GMP要求

 

鹿迦機械全自動膠囊灌裝機NJP-2000

 

鹿迦機械全自動膠囊灌裝機NJP-2000

Automatic Capsule Filling Machine

機器概述Application

此系列全自動膠囊充填機采用PLC編程，無極變頻調速，人機界面操作，觸摸屏顯示。對運行故障或缺料能自動報警顯示，自動停機，故障排除后能自動消除報警。機器還具有三級密碼操控系統，參數設置，打印數據，清零等功能，防止非專業人員隨意胡亂操作影響機器運行。 機器所有傳動軸，凸輪，軸承等主要關鍵零件均采用進口材料，設備質量可靠，是充填膠囊藥品的理想設備，并*符合GMP要求。

The automatic capsule filling machine adopts PLC programmable controller, stepless frequency converter, HMI with easy operation. While there is fault or lack of material, the machine can automatically alarm and shut down. The machine can be equipped with 3 level password system, parameter setting, data printing, clear function which make the machine work more safely and stably, preventing inprofessional workers’wrong parameter setting and messing up machine parameter settings. The cams and bearings, shafts, are by world famous brands, ensuring machine quality and lifetime. The machine main body and powder contact parts are made by stainless steel 304, which meet GMP standard.

機器特點Machine Features

1. 體積小，能耗低，更換模具快，操作方便，容易清洗； 

2. 采用福格森傳動，振動小，高速運行工作噪聲低于75dB，劑量差異控制在3%內；國產機制膠囊上機率99% 

3. 回轉部位全封閉，具備良好潤滑條件，工作臺面無油污，避免了與藥物的交叉污染； 

4. 劑量盤周邊設有攔板，非常有效地把劑量盤下平面甩出的粉通過另一管路回收再利用，同時減少了工作臺面的粉塵；

5. 機器采用德國西門子的人機界面，PLC可編程控制器，液晶顯示每分鐘產量，累計產量，動態空膠囊和藥粉狀態，缺膠囊報警提示及藥粉不夠時自動停機，故障診斷提示等。

1. Small size, low consumption of power, simplification in changing molds. Easy operating and cleaning.

2. Machine adopts Fugexan eliminating trough roller to transmit, with less vibration, lower than 75dB noise while running at high speed. The powder filling dosage error is within ±3%, The capsule filling rate is more than 99%.

3. The turning-around parts are in full closure, with excellent lubrication. Without dirty spot on the working stage, avoiding the cross pollution on medicines. 

4. Shelters are fixed around the dose disc, to recycle the medicine powder which is thrown from beneath surface of the rotating disc, which can also reduce the powder on working table.

5. Machine adopts HMI, including PLC, touch screen displaying the accumulative output, empty capsules and medicine powder state, alarm for lack of capsules and automatic stop for deficiency of medicine powder, trouble shoot display and so on.