進口可變容量葉片泵組

進口可變容量葉片泵組概述：

可變容量葉片泵轉子旋轉時，葉片在離心力和壓力油的作用下，尖部緊貼在定子內表面上。這樣兩個葉片與轉子和定子內表面所構成的工作容積，先由小到大吸油后再由大到小排油，葉片旋轉一周時，完成一次吸油與排油。

進口可變容量葉片泵工作原理：

泵由轉子1、定子2、葉片3、配油盤和端蓋等部件所組成。定子的內表面是圓柱形孔。轉子和定子之間存在著偏心。葉片在轉子的槽內可靈活滑動，在轉子轉動時的離心力以及通入葉片根部壓力油的作用下，葉片頂部貼緊在定子內表面上，于是兩相鄰葉片、配油盤、定子和轉子間便形成了一個個密封的工作腔。當轉子按逆時針方向旋轉時，圖右側的葉片向外伸出，密封工作腔容積逐漸增大，產生真空，于是通過吸油口6和配油盤5上窗口將油吸入。而在圖的左側。葉片往里縮進，密封腔的容積逐漸縮小，密封腔中的油液經配油盤另一窗口和壓油口1被壓出而輸出到系統中去。這種泵在轉子轉一轉過程中，吸油壓油各一次，故稱單作用泵。轉子受到徑向液壓不平衡作用力，故又稱非平衡式泵，其軸承負載較大。改變定子和轉子間的偏心量，便可改變泵的排量，故這種泵都是變量泵。

進口可變量葉片泵原理以及特性：

變量葉片泵工作原理 變量葉片泵的定子內表面是一個圓形，轉子與定子間有偏心距，在配油盤上只開有一個吸油窗口和一個壓油窗口。當轉子在電動機驅動下按圖示箭頭方向旋轉時，葉片經定子下半部時，在離心力的作用下，從葉片槽中伸出，兩葉片間的密封容積增大

進口可變量葉片泵技術參數:

流 量：8-40L/min
壓力：3.5-7.0MPa
轉速：800-1800r/min
驅動功率：0.7-5.8kw
配管尺寸：進口：1、1 1/2   出口：3/4、1 1/4

進口可變量葉片泵美國泰樂TYLER售后服務:
*的服務鑄就*的企業讓客戶無后顧之憂。
1、按合同要求提供產品的合格證、銘牌、檢驗報告、產地證名、安裝說明書等。
2、顧客在驗收產品過程中，如出現與合同要求不符時，我司接到顧客通知后兩小時內給處處理。
3、我司提供十二個月以上產品質保期，時間從驗收合格之日起計算。
4、在正確安裝和使用下，出現產品質量問題，本公司將負責到底

Variable capacity vane pump group of variable inlet vane pump

Overview of imported variable capacity vane pumps:

When the rotor of the variable capacity vane pump rotates, the blade is attached to the inner surface of the stator under the action of centrifugal force and pressure oil. The working volume of two rotor blades and the inner surface of the stator and the first increase after absorbing from large to small oil, rotating blades of a week, a row of oil and oil.

Working principle of variable capacity vane pump:

By 1, the pump rotor stator blade 2, 3, valve plate and the end cover and other components. The inner surface of the stator is a cylindrical hole. Eccentricity between rotor and stator. The leaves in the groove of the rotor can be flexibly slid, the centrifugal force when the rotor rotates and pass into the blade root pressure oil, at the top of the blade tightly on the inner surface of the stator, and the two adjacent blades with oil pan between the stator and rotor to form a sealed working chamber. When the rotor is rotating in the counterclockwise direction according to the figure on the right side of the blade, extends outward, the sealing chamber volume increases, resulting in vacuum, then through the suction port 6 and 5 on the oil pan with oil suction window. And on the left side of the graph. The blade to indent, seal cavity volume gradually reduced, the sealing cavity in the oil pan with oil another window and pressure oil port 1 is pressed and output to the system. This pump rotor in a turn, the oil pressure of oil each time, so that a single action pump. The rotor is subjected to radial hydraulic imbalance force, so it is also called the unbalanced pump. Changing the eccentricity between the stator and the rotor, the pump displacement can be changed, so this pump is variable pump.

Principle and characteristics of variable vane pump:

The stator vane pump working principle of variable vane pump, the inner surface is a circle, between the rotor and the stator with eccentricity, there is a kitchen window and a window open only in the oil pressure oil pan. When the rotor is driven by the motor to rotate according to the direction of the arrow, the blade is extended from the groove of the stator under the action of the centrifugal force, and the sealing volume between the two blades is increased

Technical parameters of imported variable vane pump:

Flow volume: 8-40L/min

Pressure: 3.5-7.0MPa

Speed: 800-1800r/min

Drive power: 0.7-5.8kw

Size: 1, 1: Import Export: 3/4, 1 1/4 1/2

The United States imported variable vane pump Taylor TYLER customer service service:

The first-class service created a first-class enterprise so that customers no worries.

1, according to the contract requirements for product certification, nameplate, inspection report, certificate of origin, installation instructions etc..

2, the customer in the process of acceptance of the product, such as the emergence of the contract requirements and inconsistent, I received the notification of the customer within two hours after processing.

3, our company provides more than twelve months warranty period, the time from the date of acceptance.

4, in the correct installation and use, product quality problems, the company will be responsible in the end

進口可變容量葉片泵組guan網:http://www.twvalve。。ｎｅｔ/html/2325.html