進口多級離心油泵｜美國多級離心油泵

進口多級離心油泵工作原理;

離心油泵軸在電動機的帶動下旋轉，對液體作功，使其能量增加，從而使需要數量的液體由吸入池經由泵的進水段、正葉輪、正導葉、中段、出水段的水平出水口、過渡管、次級進水段、反葉輪、反導葉、出水段的垂直出水口后，將液體*的送出。

進口多級離心油泵產品零件材質：材質均為鑄鐵或鑄鋼，如有材質要求可另行定做。

進口多級離心油泵產品參數：

流量：6.25-155m3/h
揚程：70-603m

功率：5.5-400kw
轉速：2950r/min
口徑：40-150mm
工作溫度：-20℃～+300℃
工作壓力：1.6-10.0Mpa
材質：鑄鐵、鑄鋼、不銹鋼

進口多級離心油泵應用領域：

主要可用在石油精制、石油化工和化學工業及其他地方輸送不含固體顆粒的石油、液化石油氣等介質，泵殼徑向部分，特別適用于輸送高溫高壓以及易燃、易爆或有毒的液體。

進口多級離心油泵產品選型：

1、裝置系統所需的壓力是選齒輪多級離心油泵的又一重要性能數據，一般要用放大5%—10%余量后壓力來選擇擺線齒輪泵的型號。這包括：吸油池壓力，排油池壓力，管道系統中的壓力降（壓力損失）。

2、齒輪多級離心油泵裝置系統的管路布置條件指的是送液高度、 送液距離、送液走向。以便進行系統壓力計算和動力校核。管道系統數據如果需要的話還應作出裝置特性曲線。

3、齒輪多級離心油泵的操作條件很多，如液體的操作溫度、吸入側壓力、排出側容器壓力、海拔高度、環境溫度、操作是間隙的還是連續的、齒輪泵的位置是固定的還是可移的

美國泰樂TYLER進口多級離心油泵售后服務：

用戶*，信譽*，優質、完善的售后服務是我們產品價值的延伸和對客戶利益的重要保證，我公司服務質量管理體系的宗旨是：建立并不斷完善科學、合理、高效的服務質量管理體系，公正、準確、及時地完成客戶的售后服務質量保障工作，為我公司的客戶服務建立良好、全面、充分的服務體系。

Multi stage centrifugal pump

Working principle of imported multistage centrifugal pump;

Centrifugal pump shaft rotates under the drive of the motor, the power of the liquid, its energy increases, so that the quantity of liquid from the suction tank through the water inlet section of a pump, impeller, guide vane, it is the middle section of the water level, water outlet pipe, a water inlet section, transitional secondary impeller, guide vane, anti reverse the water vertical outlet, the liquid will be sent Everfount.

Imported multi-stage centrifugal pump product parts materials: materials are cast iron or cast steel, if the material requirements can be customized.

Imported multistage centrifugal pump:

Flow: 6.25-155m3/h

Lift: 70-603m

Power: 5.5-400kw

Speed: 2950r/min

Caliber: 40-150mm

Operating temperature: -20 C ~ +300 C

Working pressure: 1.6-10.0Mpa

Material: cast iron, cast steel, stainless steel

Application of imported multistage centrifugal pump:

Mainly used in petroleum refining, petrochemical and chemical industries and other local delivery of solid particles in oil and liquefied petroleum gas medium, the pump shell radial part, especially suitable for high temperature and high pressure and transport of flammable, explosive or toxic liquid.

Selection of imported multistage centrifugal pump:

1, the pressure required for the installation of the system is another important performance of the centrifugal pump selection of performance data, the general use of the enlarged 5% - 10% margin pressure to select the cycloid gear pump model. This includes: oil suction tank pressure, oil drain tank pressure, piping system pressure drop (pressure loss).

2, the gear multistage centrifugal pump installation system piping layout refers to the delivery of liquid height, liquid delivery distance, liquid delivery. In order to carry out the system pressure calculation and dynamic check. Piping system data should also be made if necessary.

3, gear multistage centrifugal pump operating conditions, such as the operation of the liquid temperature, suction pressure, pressure from the container side, altitude, ambient temperature, or space operations are continuous, the position of the gear pump is fixed or may shift

The United States imported TYLER Taylor multistage centrifugal pump service customer service:

Customer first, reputation first, customer service quality, perfect service is the important guarantee of our products and to extend the value of the interests of customers, our service tenet is: quality management system, establish and improve the service quality management system is scientific, reasonable and efficient, fair, accurate and timely completion of customer service and customer service quality assurance the establishment of good, comprehensive, full service system for my company's customer service.