詳細介紹
使用無線輕松采集各種數據,通過鉗形傳感器簡單記錄負載電流/泄漏電流
● 用于測量交直流負載電流/交流泄漏電流(使用鉗形傳感器)
● 可選電流傳感器高達8種
● 放入配電柜中,即便關閉柜門也能監測數據
● 設置電壓和功率因數后,能進行簡單的功率測量
● 放置空間要求低,小巧的2ch
● 測量數據可通過Bluetooth®無線技術傳輸至LR8410-30或LR8410-30特制品中
● 通訊中斷時也能保持測量數據
● 3WAY電源(AC適配器、5號堿性干電池、外部電源5V~13.5V)
● 存儲容量每1通道50萬個數據
基本參數(精度保證時間1年)
操作 | 使用無線通訊將測量數據傳輸至LR8410-30或LR8410-30特制品中,采集數據需要LR8410-30或LR8410-30特制品,最多可控制7臺,通訊距離:無障礙物最長30m |
---|---|
測量功能 | [通道數]2ch(共地) [測量項目]AC負載電流,DC負載電流,AC泄漏電流(根據電流傳感器不同而不同) [測量量程] AC500.0 mA~2000 A, DC10.00 A~2000 A(根據電流傳感器不同而不同) ※不能測量間歇電流、泄漏電流 |
測量精度 | ±0.5% rdg. ±5 dgt. (DC, AC50/60 Hz) ※連接電流傳感器時加上傳感器的精度 |
記錄 | [間隔] 0.5~30秒, 1~60分, 14檔切換,[模式]瞬時值、平均值記錄 |
電源 | AC適配器Z2003 (AC100~240 V, 50/60 Hz),5號堿性干電池(LR6)×2,外部電源DC5~13.5 V |
連續使用時間 | 5號堿性干電池的話測量瞬時值約10天(間隔1秒,Bluetooth® ON) |
體積及重量 | 85W × 75H × 38D mm, 130 g(含電池) |
附件 | CD-R(使用說明書,Logger Utility)×1, 測量指南 ×1, 電波使用上的注意事項 ×1, 5號堿性干電池 (LR6) ×2 |
Various data can be collected easily by wireless, and load current/leakage current can be simply recorded by clamp sensor
For measuring ac/dc load current/ac leakage current (using clamp sensor)
Up to 8 optional current sensors
Put into the distribution cabinet, even close the cabinet door can monitor data
Simple power measurement can be carried out after setting voltage and power factor
Low space requirements, compact 2ch
When measuring data through Bluetooth ® wireless transmission technology to LR8410-30 or LR8410-30 specialty products
Maintain measurement data even when communication is interrupted
3WAY power supply (AC adapter, no.5 alkaline dry battery, external power supply 5V ~ 13.5V)
Storage capacity of 500,000 data per channel