實驗室流化床CVD：1200℃真空氣氛垂直管式爐

SGM 實驗室流化床CVD是由洛陽西格馬高溫電爐生產的真空氣氛垂直管式爐，為化學氣相沉積法可控及批量制備碳納米管設備。

SGM laboratory fluidized bed CVD is a vertical tube furnace with vacuum atmosphere produced by Luoyang sigma high temperature electric furnace. It is a controllable and batch preparation equipment of carbon nanotubes by chemical vapor deposition.

西格馬 三溫區立式管式爐

實驗室流化床CVD設備包括有：自動加液裝置、超聲波霧化發生裝置、氣體供應裝置、氣體流量控制裝置、流化床反應器及加熱裝置、旋風分離器、固體收集裝置、凈化處理裝置。氣體供應裝置出氣口在經過氣體流量控制裝置后與超聲波霧化裝置進氣口相連接，自動加液裝置出液口與超聲波霧化發生裝置進液口相連接，通過霧化裝置內部的液體控制裝置來控制加液。超聲波霧化裝置的出口與三溫區流化床反應器的進料口相連接，反應器的出料口通過透明管與旋風分離器相連接，旋風分離器上面的氣體出口與凈化處理裝置相連接，下面的固體捕集出口與固體收集器相連接。經過旋風分離器后，大量的氣體向上通過凈化裝置后排向大氣，而固體則捕集到固體收集裝置中。碳納米管生長*難控制的就是氣場和流場溫度差異相互影響，由于變量太多，無法確保生長的碳納米管形態一致，從而質量質量非常低，可解決氣場和流場及溫度變量的相互影響。

The laboratory fluidized bed CVD equipment includes: automatic liquid feeding device, ultrasonic atomization generator, gas supply device, gas flow control device, fluidized bed reactor and heating device, cyclone separator, solid collection device and purification treatment device. After passing through the gas flow control device, the gas outlet of the gas supply device is connected with the air inlet of the ultrasonic atomization device, and the liquid outlet of the automatic liquid feeding device is connected with the liquid inlet of the ultrasonic atomization generating device, and the liquid feeding is controlled by the liquid control device inside the atomization device. The outlet of the ultrasonic atomization device is connected with the feed inlet of the three temperature zone fluidized bed reactor, the outlet of the reactor is connected with the cyclone separator through a transparent tube, the gas outlet above the cyclone separator is connected with the purification treatment device, and the solid capture outlet below is connected with the solid collector. After the cyclone separator, a large amount of gas upward through the purification device back to the atmosphere, and the solid is captured in the solid collection device. The most difficult thing to control the growth of carbon nanotubes is the interaction of temperature difference between gas field and flow field. Because of too many variables, it is impossible to ensure that the morphology of carbon nanotubes is consistent, so the quality of carbon nanotubes is very low.

可通過流量計和靜態混氣室把氣體均勻混拌，通過上通氣，氣體通過雙層管(夾層管預熱氣體，內腔體生長碳納米管)確保通入的氣體進入生長腔體內溫度一直，通過多空陶瓷網的結構設計，從而解決均勻進氣的問題。使的生長腔體熱場流場穩定，確保得到高質量重復性好的碳納米管。(另配一臺加熱霧化裝置，一個氫氣報警器)

The gas can be evenly mixed through a flowmeter and a static air mixing chamber. Through the upper ventilation, the gas passes through the double-layer tube (the sandwich tube preheates the gas, and the carbon nanotubes grow in the inner cavity) to ensure the temperature of the gas entering the growth chamber. Through the structural design of multi space ceramic mesh, the problem of uniform air intake can be solved. The results show that the thermal field flow field of the growth chamber is stable, and the carbon nanotubes with high quality and good repeatability are obtained. (equipped with a heating atomization device and a hydrogen alarm)

實驗室流化床CVD主要技術參數：

1、電爐名稱：實驗室流化床CVD

2、爐管材質：高純石英管

3、爐管尺寸：OD: 80 mm (外管)，OD 50mm(內管)

4、加熱元件：首鋼、康奈爾電阻絲

5、工作溫度：連續工作溫度：≤1100℃

6、溫控系統：30段可編程控溫，PID參數自整定，操作界面為7"液晶觸摸屏控制

7、控溫精度：±1℃

8、加熱區長度：600mm

9、恒溫區長度：400mm

10、供氣系統：內部裝有3路高精度質量流量計可準確的控制氣體流量；設靜態混氣室，有助于氣體充分混合，按要求配比。

1）流量計標準量程：100sccm，200sccm，200sccm，500sccm(非特殊以氮?dú)鈽?biāo)定，量程可選)

2）工作溫度：5~45℃

3）工作壓差：0.1~0.5MPa

4）壓力：3MPa

5）準確度：±1.5% FS

6）測量范圍：-0.1~0.15 MPa(0.01 MPa/grid)

7）針閥：316不銹鋼

8）混氣罐：Φ80×120mm

9）截止閥：Φ6mm”316不銹鋼針閥

10）尺寸：600×600×650 mm

SiC包覆層是高溫氣冷堆核燃料元件TRISO包覆顆粒*關鍵的一層。制備細晶SiC包覆層對阻擋裂變產物釋放、提高SiC包覆層承壓能力等具有重要意義。

管式爐常規爐型選型表