WZ型系列單效外循環濃縮器
WZ Series type single-effect outer circulation concentrator
本設備適用于中藥、西藥、葡萄糖、淀粉糖、口服液、化工、食品、味精、乳品等物料濃縮與工業有機溶劑(如酒精)的回收,適用于批量小、品種多的熱敏性物料的低溫真空濃縮。
The device is to concentrate the material in the occasions such as China traditional drug、west drug、dextrose、amylum sugar、oral liquid、chemisty、foodstuff、monosodium glutamate and milk product and to reclaim the industrial organic solvent such as alcohol.it is suitable to concentrate the thermal sensitive material under lower temperature and vacuum with little batch number and multiple varieties.
技術參數 Technology Parameter:
型 號 規 格 | WZ-500 WZ-1000 WZ-1500 WZ-2000 |
蒸發量(kg/h) | 500 1000 1500 2000 |
蒸汽壓力(Mpa) | 0.09 |
真空度(Mpa) | -0.08 |
濃縮比重 | 1.2-1.4 |
長 | 2000 2200 2500 4600 |
外型尺寸(mm) 寬 | 1000 1200 1300 2350 |
高 | 3000 3300 3500 5100 |
容器類別 | 常壓 |
設備特點與效益:
1、 酒精回收:回收能力大,采用真空濃縮流程。比老型同類設備提高了5-10倍,降低能耗30%,具有投資小,回收效益高的特點。
2、 濃縮液料:本設備采用外加熱自然型循環式與真空負壓蒸發方式,蒸發速度快,濃縮比重可達1.3;液料在全密封狀態無泡沫濃縮,本設備濃縮出來的藥液,具有無污染,藥味濃的特點,而且清洗方便(打開加熱器上下蓋即可進行清洗)。本設備操作簡單,占地面積小。加熱器、蒸發器采用不銹鋼保溫結構,保溫采用聚胺脂發泡,外表面磨砂亞光處理,符合GMP醫藥標準。
Feature and profit
1、 Alcohol reclamation:Large reclamation capacity and the vacuum concentration procedure make it’s production capacity five to ten times of that of the old counterpart and can lower the energy consumption for30%,featuring little investment and high reclamation profit.
2、 Cocentrated liquid material:The device uses the modes of outer-heated natural cycle and vacuum negative pressure evaporation featuring swift evaporation with concentration proportion of 1.3;The liquid material loncentrates without bubble under full seal state.The drug liquid after concentration by the device features non-contamination and thick drug taste and easy cleaning(it is just to open the upand duown cover for cleaning).The device is easy to handle and it needs a little foundation area for installation.The heater and evaporator use stainless steel for thermal purpose.The polyurethane is used as the thermal material.The surface is treated with sand grinding and surface polishing,meeting with the GMP standard.