泰克的 MSO/DPO2000B 混合信號示波器系列支持高達 200 MHz 的帶寬、1 GS/s 的取樣速率，以入門級價格提供了的調試功能。其擁有多達 20 條通道用于分析模擬和數字信號，查找和診斷復雜設計中的問題十分迅速。MSO/DPO2000B 在所有通道上標配 1M 點的深記錄長度，可以捕獲長信號活動窗口，同時保持精細的定時分辨率。
主要性能指標
200、100、70 MHz 帶寬型號
2 個和 4 個模擬通道型號
16 個數字通道（MSO 系列）
全部通道均實現 1 GS/s 采樣率
所有通道上的記錄長度均為 1 兆點
波形捕獲速率 5,000 wfm/s
高級觸發套件
主要特點
Wave Inspector® 控件為波形數據提供方便導航和自動化搜索
FilterVu™ 可變低通濾波器，可以去掉不想要的信號噪聲，同時捕獲高頻事件
29 個自動測量和 FFT 分析可簡化波形分析
TekVPI® 探頭接口支持有源探頭、差分和電流探頭進行自動縮放和單位設置
7 英寸（180 毫米）寬屏 TFT-LCD 彩色顯示器
體積小、重量輕 – 厚度僅 5.3 英寸（134 毫米），重量?jī)H 7 磅 14 盎司（3.6 千克）
5 年保修
連接能力
前面板上 USB 2.0 主控端口，快速方便地存儲數據
后面板上有 USB 2.0 設備端口用于連接 PC 或直接打印到 PictBridge® 兼容打印機
選配 10/100 以太網接口用于網絡連接，視頻輸出接口用于將示波器顯示屏輸出到監視器或投影儀
選配串行觸發和分析
I2C、SPI、CAN、LIN 和 RS-232/422/485/UART 自動串行觸發、解碼和搜索選項
功能豐富的混合信號設計診斷工具
通過功能豐富的工具來簡化和加速?gòu)?fù)雜設計的調試，包括用于快速波形導航的和自動串行和并行總線分析的 Wave Inspector®控件。
完善的功能，加快每一個調試階段
MSO/DPO2000B 系列具有一系列強大的功能，從快速發現異常并捕獲，到搜索事件的波形記錄并分析其特性及設備的行為，全面加速調試設計的每一階段。
發現
如果想調試設計問題，首先必須知道存在問題。每個設計工程師都要用大量的時間查找電路中的問題，如果沒有合適的調試工具，這項任務耗時長、非常麻煩。
MSO/DPO2000B 系列提供了全面的信號查看功能，可以迅速了解設備的實際操作。5,000wfm/s 的波形捕獲速率可以迅速查看毛刺和其它偶發瞬態信號，揭示設備問題的真正特點。帶亮度等級的數字熒光顯示器通過對發生更加頻繁的信號區域進行加亮，顯示信號活動的歷史記錄，形象顯示出異常發生的頻率。
Key performance indicators
200, 100, 70 MHz bandwidth model
2 and 4 analog channel models
16 digital channels (MSO series)
All channels achieve 1 GS/s sampling rate
The record length on all channels is 1 Megabyte
The maximum waveform capture rate is 5,000 WFM /s
Advanced trigger suite
The main features
Wave Inspector ® controls provide convenient navigation and automatic search for waveform data
FilterVu ™ variable low pass filter, can get rid of the unwanted signal to noise, at the same time, to capture the high frequency
The waveform analysis can be simplified by 29 automatic measurements and FFT analysis
TekVPI ® sensor interface support active probe, difference and current sensor for automatic scaling and unit Settings
7 inch (180 mm) widescreen tft-lcd color display
It's small and light -- just 5.3 inches thick and weighs 7 pounds, 14 ounces.
5 years warranty
connectivity
USB 2.0 main control port on the front panel for fast and convenient data storage
On the rear panel has a USB 2.0 device ports used to connect to a PC or print directly to the PictBridge ® compatible printer
Optional 10/100 Ethernet interface for network connection, video output interface for the oscilloscope display output to the monitor or projector
Optional serial trigger and analysis
I2C, SPI, CAN, LIN and rs-232/422/485 /UART automatic serial trigger, decoding and search options
Rich functions of mixed signal design diagnostic tools
Through feature-rich tools to simplify and speed up the process of debugging complex design, including for rapid waveform navigation and automatic analysis of serial and parallel bus Wave Inspector ® controls.
Perfect function to speed up every debugging stage
MSO/DPO2000B series has a series of powerful functions, from the rapid detection and capture of exceptions, to the search event waveform record and analysis of its characteristics and equipment behavior, comprehensively accelerate the debugging design of each stage.
found
If you want to debug a design problem, you must first know that there is a problem. Every design engineer spends a lot of time looking for problems in the circuit, a task that can be time-consuming and cumbersome without proper debugging tools.
The MSO/DPO2000B series provides a comprehensive view of the signal to quickly understａnd the actual operation of the device. The waveform capture rate of 5,000 WFM /s allows a quick look at burrs and other occasional transient signals to reveal the true nature of the device problem. The digital fluorescent display with brightness level highlights the signal area with more frequent occurrence, displays the historical record of signal activity, and displays the frequency of abnormal occurrence.
采購中心
