臥式活塞卸料離心機主要技術參數 : | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
產品結構原理Structures and Principles The main motor drives the basket to rotate at a full speed, material being fed into through a feed pipe and distributed evenly on filter screen walls of the basket inner sect. Under the centrifugal force, the liquid is discharged out of the basket through filter screen and the holes of the basket, and then out of the machine through the tube for discharging liquid, while the solid deposits in the basket as a ring layer of cake. As the pusher plate is rotating at the same speed as the basket, it is pushed by the piston to reciprocate continuously and axially, thus pushing the cake layer to move out of the basket and then out of the machine from its front shell base. HY Series are a kind of pusher filtering centrifuge with continuous operation. They can perform feeding, separating washing and discharging in sequence at their full-speed running. This machine has the advantages of continuous operation, stable performance, easy operation, large capacity, ideal washing effect and low moisture content of cake. They can be used for separating the suspension with solid phase particle size of more than 0.1mm and with the concentration of over 40%. They are suitable for chemical industry industry, fertilizer, manufacturing salt and alkali, especially suitable for the solid-liquid separation of ammonium bicarbonate, ammonium chloride, mirabilite, etc. 產品設計、制造標準 : 1 、 根據 JB/T447-1992 《臥式活塞推料離心機技術條件》 、 JB/T4063-1991 《臥 式活塞推料離心機型式與基本參數》等標準設計和制造,按 GB/T19001-2000idt ISO9001-2000 標準質量體系進行。 2 、 產品檢測技術及手段: 根據湖南省湘潭離心機有限公司 《質量保證手冊》 第 4.11 檢測、測量和試驗設備的控制對產品進行檢測。 產品設計、制造標準 : 1 、 根據 JB/T447-1992 《臥式活塞推料離心機技術條件》 、 JB/T4063-1991 《臥 式活塞推料離心機型式與基本參數》等標準設計和制造,按 GB/T19001-2000idt ISO9001-2000 標準質量體系進行。 2 、 產品檢測技術及手段: 根據湖南省湘潭離心機有限公司 《質量保證手冊》 第 4.11 檢測、測量和試驗設備的控制對產品進行檢測。 產品設計、制造標準: 1、根據JB/T447-1992《臥式活塞推料離心機技術條件》、JB/T4063-1991《臥式活塞推料離心機型式與基本參數》等標準設計和制造,按GB/T19001-2000idt ISO9001-2000標準質量體系進行。 2、產品檢測技術及手段:根據湖南省湘潭輝煌離心機機械制造有限公司《質量保證手冊》第3.9檢測、測量和試驗設備的控制對產品進行檢測。
特別提示: 1、技術參數以生產廠家說明書為準。 2、洽詢時,請顧客詳細賜告物料特性參數及工況條件要求。 l 濾網間隙寬度選擇范圍:0.1-0.4mm。 l 可按GMP規范設計、制造。 |